Design Of D-Flip-Flop Circuits Using TG Methodology
Palavras-chave:
D flip-flop, Trasmission gate, power efficiency, logic systemsResumo
This paper details the design and performance analysis of D flip-flop circuits employing transmission gate (TG) technology, with a focus on their efficiency and power consumption characteristics. As the basic units of memory and data storage in digital systems, D flip-flops are indispensable. By decreasing power consumption and increasing speed, the TG method improves these circuits' performance. To do this, it builds a better switching mechanism using transistor pairs that are complementary to one another.The power usage research for this project primarily examines the average, maximum, and minimum power measurements during a certain time period. Based on the findings, it seems that the D flip-flop produced by TG has a much better power efficiency, especially during
active periods, yet it still works reliably. Examining critical power consumption areas, this study proves that the TG design effectively lowers power consumption without sacrificing performance. The paper delves further than just talking about power efficiency; it also investigates the consequences of applying the TG method to the context of modern digital applications, where minimising power use
is paramount. The results have important implications for improving electronic memory and logic systems by developing more efficient digital circuits, which is the main goal of the study. By enhancing overall system performance in technologically challenging scenarios, this report paves the way for future research that might lead to optimal flip-flop
Referências
. Kang, S. M., & Leblebici, Y. (2003). CMOS Digital Integrated Circuits: Analysis & Design (3rd ed.). McGraw- Hill.
. Muller, R. S., & Eastman, L. F. (1998). Device Electronics for Integrated Circuits (3rd ed.). Wiley.
. Lipasti, M. H., & Smith, A. J. (2000). "The impact of transmission gates on flipflop performance." IEEE Transactions on VLSI Systems, 8(4), 479-485. https://doi.org/10.1109/92.852141
. Rabaey, J. M., Chandrakasan, A., & Nikolic, B. (2002). Digital Integrated Circuits: A Design Perspective (2nd ed.). Prentice Hall.
. Shukla, S., Aggarwal, A., & Gupta, R. (2005). "Low-power flip-flop design using transmission gates." Proceedings of the IEEE International Conference on VLSI Design, 62-65. https://doi.org/10.1109/VLSID.2005.1530 142
. Sudevalayam, S., & Kundu, A. (2011). "Low power D flip-flops and their applications." IEEE Transactions on Very https://doi.org/10.1109/ICCAS.2014.6778 Large Scale Integration (VLSI) Systems, 778 19(10), 1716-1729. https://doi.org/10.1109/TVLSI.2010.20654 19
. Chandrakasan, A. P., Sheng, S., & Brodersen, R. P. (1992). "Low-power CMOS digital design." IEEE Journal of Solid-State Circuits, 27(4), 473-484. https://doi.org/10.1109/4.126661
. Lee, H. R., & Park, Y. (2005). "Design of low power D flip-flops with reduced delay." Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), 2396-2399. https://doi.org/10.1109/ISCAS.2005.14657 09
. Gupta, P., & Chauhan, M. (2013). "A comparative analysis of low-power flipflop designs using transmission gate-based logic." Microelectronics Journal, 44(3), 242-247. https://doi.org/10.1016/j.mejo.2012.11.005
. Srinivasan, S., & Chatterjee, M. (2014). "Design of a low power D flip-flop using transmission gates." Proceedings of the IEEE International Conference on Circuits and Systems (ICCAS), 126-130.
Downloads
Publicado
Edição
Secção
Licença

Este trabalho encontra-se publicado com a Licença Internacional Creative Commons Atribuição 4.0.