MPPT-Based Integrated Generator-Rectifier System for Wind Energy System

Authors

  • Raja Reddy Duvvuru Associate Professor, EEE Department, Malla Reddy Engineering College, Hyderabad Author

Keywords:

AC-DC power conversion, dc power systems, maximum power point trackers (MPPT), wind energy generation

Abstract

Offshore wind is rapidly becoming a key renewable energy source. It involves wind that flows from land towards the sea, and effectively harnessing this energy requires the use of large, multi-megawatt wind turbines along with highly efficient, high power density, and reliable power conversion systems to maintain a competitive Levelized Cost of Electricity (LCOE). An integrated system that incorporates both active and passive rectifiers with a multiport permanent magnet synchronous generator offers a promising
solution for electro-mechanical power conversion. For offshore wind energy applications, these integrated systems must incorporate maximum power point tracking (MPPT), which is challenging due to the presence of multiple uncontrolled passive rectifiers. Additionally, AC-to-DC power conversion is critical in Wind Energy Conversion Systems to reduce system losses. This conversion process is essential for emerging high-power applications like electrified transportation and wind power generation. The project demonstrates the feasibility of MPPT by showing that controlling the active-rectifier d-axis current can regulate the total system output power. This MPPT capability presents new opportunities for integrated systems in offshore wind applications.

References

P. Huynh, S. Tungare, and A. Banerjee, “Maximum Power Point Tracking for Wind Turbine Using Integrated Generator-Rectifier Systems,” in Proc. IEEE Energy Convers. Congr. Expo, Sep. 2019, pp. 13–20.

Ian A. Hiskens “Dynamics of Type-3 wind turbine generator models,” IEEE Transactions on power systems, vol. 27, no. 1, february 2012.

C. Bak et al., “Light rotor: The 10-MW Reference Wind Turbine,” in Proc. Eur. Wind Energy Conf. Exhib., 2012, pp. 1–10.

Ming Yin, Gengyin Li, Ming Zhou and Chengyong Zhao, “Modeling of the Wind Turbine with Permanent Magnet Synchronous Generator for Integration,” Renewable Sustain. Energy Rev., vol. 37, pp. 599–612, 2014.

Conroy JF and W. Musial, P. Beiter, P. Spitsen, J. Nunemaker, and V. Gevorgian, “2018 Offshore Wind Technologies Market Report,” National Renewable Energy Laboratory, Golden, CO, Canada, Tech. Rep., Aug. 9,2019.

Siemens Gamesa, “SG 10.0-193DD Offshore Wind Turbine,” Jan. 16, 2019. [Online]: https://www.siemensgamesa.com/en-int/products and services/offshore/wind-turbinesg-10-0- 193-dd.

A. Yazdani and R. Iravani, “A neutral-point clamped converter system for direct-drive variable-speed wind power unit,” IEEE Transactions on Energy Conversion, vol. 21, no. 2, pp. 596–607, June 2006.

V. Yaramasu, B. Wu, P. C. Sen, S. Kouro, and M. Narimani, “High-Power Wind Energy Conversion Systems: State-of-the-art and emerging technologies,” Proc. IEEE, vol. 103, no. 5, pp. 740–788, May 2015.

M. Chinchilla, S. Arnaltes, and J. C. Burgos, “Control of Permanent Magnet Generators Applied to Variable-Speed Wind-Energy Systems Connected to the Grid,” IEEE Trans. Energy Convers., vol. 21, no. 1, pp. 130– 135, Mar. 2006.

Jogendra Singh Thongam and Mohand Ouhrouche, “MPPT Control Methods in Wind Energy Conversion Systems,” Published in July 5th, 2011.

J. G. Slootweg, “Wind Power Modelling and Impact on Power Systems Dynamics,” Ph.D. Dissertation, Delft Univ. Technology, Delft, The Netherlands, 2003.

Downloads

Published

2026-06-01