Development of a 3D-Printed Patient-Specific Cranial Implant: Mechanical and Biocompatibility Testing
DOI:
https://doi.org/10.5281/zenodo.22480214Keywords:
cranioplasty, 3D printing, polyetheretherketone, titanium implant, biocompatibilityAbstract
Background: Large calvarial defects increasingly are reconstructed with 3D-printed, patient-specific implants (PSIs), yet surgeons and biomedical engineers must choose among polyetheretherketone (PEEK), titanium, and polymethylmethacrylate (PMMA) with differing mechanical and biological trade-offs. Objective: This narrative review synthesizes published evidence on the design, mechanical performance, and biocompatibility/clinical outcomes of 3D-printed cranial PSIs. Methods: Peer-reviewed studies covering virtual-surgical-planning workflows, bench and finite-element mechanical testing, biocompatibility data, and clinical case series or trials for PEEK, titanium, and PMMA cranioplasty were narratively synthesized; no new experiments were performed. Findings: Titanium provides the greatest mechanical strength margin, PEEK offers stiffness closest to native bone with favorable imaging compatibility, and PMMA remains the most economical, mould-castable option; biocompatibility and multi-year outcome data, including randomized trials, show broadly comparable complication profiles across alloplastic materials, all outperforming autologous bone. Conclusions: No single material is universally superior; selection should balance mechanical demand, imaging needs, infection risk, cost, and institutional manufacturing access, with future work needed on standardized cranial-specific mechanical testing and larger comparative trials.
References
Honeybul S, Ho KM (2011). Long-term complications of decompressive craniectomy for head injury. Journal of Neurotrauma, 28(6), 929-935. DOI: 10.1089/neu.2010.1612.
García-Mato D, Ochandiano S, García-Sevilla M, Navarro-Cuéllar C, Darriba-Allés JV, García-Leal R, Calvo-Haro JA, Pérez-Mañanes R, Salmerón JI, Pascau J (2019). Craniosynostosis surgery: workflow based on virtual surgical planning, intraoperative navigation and 3D printed patient-specific guides and templates. Scientific Reports, 9, 17691. DOI: 10.1038/s41598-019-54148-4.
Ghai S, Sharma Y, Jain N, Satpathy M, Pillai AK (2018). Use of 3-D printing technologies in craniomaxillofacial surgery: a review. Oral and Maxillofacial Surgery, 22(3), 249-259. DOI: 10.1007/s10006-018-0704-z.
Kurtz SM, Devine JN (2007). PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials, 28(32), 4845-4869. DOI: 10.1016/j.biomaterials.2007.07.013.
Panayotov IV, Orti V, Cuisinier F, Yachouh J (2016). Polyetheretherketone (PEEK) for medical applications. Journal of Materials Science: Materials in Medicine, 27(7), 118. DOI: 10.1007/s10856-016-5731-4.
Huang KP, Juan HF, Chen WY, Wu CH, Wen CJ, Cho TM, Huang JC, Chou CH, Ou KL (2019). The potential of the three-dimensional printed titanium mesh implant for cranioplasty surgery applications: biomechanical behaviors and surface properties. Materials Science and Engineering: C, 97, 412-419. DOI: 10.1016/j.msec.2018.11.075.
Sun J, Yang Y, Wang D (2013). Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting. Materials & Design, 49, 545-552. DOI: 10.1016/j.matdes.2013.01.038.
Csámer L, Csernátony Z, Novák L, Kővári VZ, Kovács ÁÉ, Horváth HS, Manó S (2023). Custom-made 3D printing-based cranioplasty using a silicone mould and PMMA. Scientific Reports, 13, 11985. DOI: 10.1038/s41598-023-38772-9.
Morales-Gómez JA, Garcia-Estrada E, Leos-Bortoni JE, Delgado-Brito M, Flores-Huerta LE, De La Cruz-Arriaga AA, Torres-Díaz LJ, Martínez-Ponce de León AR (2019). Cranioplasty with a low-cost customized polymethylmethacrylate implant using a desktop 3D printer. Journal of Neurosurgery, 130(5), 1721-1727. DOI:
3171/2017.12.JNS172574. 10. Sharma N, Aghlmandi S, Dalcanale F, Seiler D, Zeilhofer HF, Honigmann P, Thieringer FM (2021). Quantitative assessment of point-of-care 3D-printed patient-specific polyetheretherketone (PEEK) cranial implants. International Journal of Molecular Sciences, 22(16), 8521. DOI: 10.3390/ijms22168521.
Czyżewski W, Jachimczyk J, Hoffman Z, Szymoniuk M, Litak J, Maciejewski M, Kura K, Rola R, Torres K (2022). Low-cost cranioplasty—a systematic review of 3D printing in medicine. Materials, 15(14), 4731. DOI: 10.3390/ma15144731.
McElhaney JH, Fogle JL, Melvin JW, Haynes RR, Roberts VL, Alem NM (1970). Mechanical properties of cranial bone. Journal of Biomechanics, 3(5), 495-511. DOI: 10.1016/0021-9290(70)90059-X.
Eppley BL (2005). Biomechanical testing of alloplastic PMMA cranioplasty materials. Journal of Craniofacial Surgery, 16(1), 140-143. DOI: 10.1097/00001665-200501000-00028.
Moncayo-Matute FP, Torres-Jara PB, Bohorquez-Vivas DD, Moya-Loaiza DP, Vázquez-Silva E (2026). Biomechanical evaluation of custom cranial implants in PMMA and PEEK using finite element analysis: bone coupling and fixation system. In: Proceedings of the XVI Ibero-American Congress of Mechanical Engineering (CIBIM 2024), Springer, Cham, 27-40. DOI: 10.1007/978-3-032-22823-9_3.
Huys SEF, Van Gysel A, Mommaerts MY, Vander Sloten J (2021). Evaluation of patient-specific cranial implant design using finite element analysis. World Neurosurgery, 148, 198-204. DOI: 10.1016/j.wneu.2021.01.102.
Xie BS, Wang FY, Zheng SF, Lin YX, Kang DZ, Fang WH (2021). A novel titanium cranioplasty technique of marking the coronal and squamosoparietal sutures in three-dimensional titanium mesh as anatomical positioning markers to increase the surgical accuracy and reduce postoperative complications. Frontiers in Surgery, 8, 754466. 10.3389/fsurg.2021.754466.
Leão RS, Maior JRS, Lemos CAA, Vasconcelos BCE, Montes MAJR, Pellizzer EP, Moraes SLD (2018). Complications with PMMA compared with other materials used in cranioplasty: a systematic review and meta-analysis. Brazilian Oral Research, 32, e31. DOI: 10.1590/1807-3107bor-2018.vol32.0031.
Zaed I, Cardia A, Stefini R (2022). From reparative surgery to regenerative surgery: state of the art of porous hydroxyapatite in cranioplasty. International Journal of Molecular Sciences, 23(10), 5434. DOI: 10.3390/ijms23105434.
Zaccaria L, Tharakan SJ, Altermatt S (2017). Hydroxyapatite ceramic implants for cranioplasty in children: a single-center experience. Child's Nervous System, 33(2), 343-348. DOI: 10.1007/s00381-016-3327-4.
Jonkergouw J, van de Vijfeijken SECM, Nout E, Theys T, Van de Casteele E, Folkersma H, Depauw PRAM, Becking AG (2016). Outcome in patient-specific PEEK cranioplasty: a two-center cohort study of 40 implants. Journal of Cranio-Maxillofacial Surgery, 44(9), 1266-1272. DOI: 10.1016/j.jcms.2016.07.005.
Punchak M, Chung LK, Lagman C, Bui TT, Lazareff J, Rezzadeh K, Jarrahy R, Yang I (2017). Outcomes following polyetheretherketone (PEEK) cranioplasty: systematic review and meta-analysis. Journal of Clinical Neuroscience, 41, 30-35. DOI: 10.1016/j.jocn.2017.03.028.
Schön S, Skalicky N, Sharma N, Zumofen DW, Thieringer FM (2021). 3D-printer-assisted patient-specific polymethyl methacrylate cranioplasty: a case series of 16 consecutive patients. World Neurosurgery, 148, e356-e362. 10.1016/j.wneu.2020.12.138.
Henry J, Amoo M, Taylor J, O'Brien DP (2021). Complications of cranioplasty in relation to material: systematic review, network meta-analysis and meta-regression. Neurosurgery, 89(3), 383-394. DOI: 10.1093/neuros/nyab180.
Morselli C, Zaed I, Tropeano MP, Cataletti G, Iaccarino C, Rossini Z, Servadei F (2020). Comparison between the different types of heterologous materials used cranioplasty: a systematic review of the literature. Journal of Neurosurgical Sciences, 63(6), 723-736. 10.23736/S0390-5616.19.04779-9.
Lindner D, Schlothofer-Schumann K, Kern BC, Marx O, Müns A, Meixensberger J (2017). Cranioplasty using custom-made hydroxyapatite versus titanium: a randomized clinical trial. Journal of Neurosurgery, 126(1), 175-183. 10.3171/2015.10.JNS151245.
Honeybul S, Morrison DA, Ho KM, Lind CRP, Geelhoed E (2017). A randomized controlled trial comparing autologous cranioplasty with custom-made titanium cranioplasty. Journal of Neurosurgery, 126(1), 81-90. 10.3171/2015.12.JNS152004.
Carbonaro R, Ghiringhelli M, Nataloni A, Amendola F, Catapano G, Vaienti L, Umana GE, Fricia M, Zingaretti N, Zanotti B (2025). Long-term series of custom-bone hydroxyapatite cranioplasty: outcomes and survival at 15 years. Journal of Craniofacial Surgery, 36(4), 1263-1266. DOI: 10.1097/SCS.0000000000011061. DOI: DOI: in DOI: DOI: DOI:
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Uldis Balodis, et al.

This work is licensed under a Creative Commons Attribution 4.0 International License.