STUDY ON G+6 BUILDING WITH DIFFERENT PLAN IRREGULARITIES BY STAAD PRO SOFTWARE

Authors

  • Vinod Kumar Student, Department of Civil Engineering, Bheema Institute of Technology and Science, Adoni, A.P Author
  • P P Guptha Assistant Professor, Department of Civil Engineering, Bheema Institute of Technology and Science, Adoni, A.P Author

Keywords:

dynamic displacement, aerodynamic shaping, architectural design,, STAAD Pro V8i, shear force, bending moment, and building deflection.

Abstract

Because of their effective structural systems and 
use of high-strength materials, modern tall 
buildings are able to lower their height and 
become more thin, flexible, and damping
efficient.  
The residents of these flexible 
structures experience discomfort due to their 
extreme sensitivity to seismic load and wind 
stimulation.  Thus, a lot of research and studies 
have been conducted to lessen such an excitation 
and enhance tall structures' resistance to 
earthquake and wind loads.  A tall building's 
architectural design heavily relies on the early 
integration 
of aerodynamic shape, wind 
engineering 
considerations, 
and 
structural 
system choices to minimise the building's 
reaction to wind excitations.  
In order to 
decrease its dynamic displacement within the 
bounds of the criteria level for the design wind 
speed, a tall structure with an inappropriate form 
often needs a lot of steel or a unique damping 
system.  
Four different shaped buildings are 
generally studied for this research work: 
circular, rectangular, square, and triangular. It 
makes sense that choosing the right building 
shape and making architectural changes are also 
very important and effective design approaches 
to reduce wind and earthquake induced motion 
by altering the flow pattern around the building.  
The current research employed STAAD Pro V8i 
software to compare the shear force, bending 
moment, and deflection of buildings of the 
following shapes: rectangular, T-shaped, H
shaped, and O-shaped.  

References

Amin Alavi, P. Srinivasa Rao., Effect of Plan Irregular RC Buildings in High Seismic Zone. Aust. J. Basic & Appl. Sci., 7(13): 1-6, 2013.

Bureau of Indian Standards: IS-1893, part 1 (2002), Criteria for Earthquake Resistant Design of Structures: Part 1 General provisions and Buildings, New Delhi, India.

Bureau of Indian Standards: IS-875, part 1 (1987), Dead Loads on Buildings and Structures, New Delhi, India.

Giordano, A., M. Guadagnuolo and G. Faella, 2008. “Pushover Analysis of Plan Irregular Masonry Buildings”. In the 14th world conference on earthquake engineering. Beijing, China, 12-17.

Guleria, Abhay. "Structural Analysis of a Multi-Storeyed Building Using ETABS for Different Plan Configurations." Vol. 3.Issue 5 (2014): 1481-484. International Journal of Engineering Research & Technology (IJERT). Web. 1 May 2014.

Herrera, Raul Gonzalez and Consuelo Gomez Soberon, 2008. Influence of Plan Irregularity of Buildings." In the 14th world conference on earthquake engineering. Beijing, China, 12-17.

M.R.Wakchaure, AnantwadShirish, RohitNikam, “Study of Plan Irregularity on High-Rise Structures”, International Journal of Innovative Research &Developement, Vol 1 Issue 8 October 2012.

Poonam, Anil Kumar and A. K. Gupta, “Study of Response of Structural Irregular Building Frames to Seismic Excitations,” International Journal of Civil, Structural, Environmental and Infrastructure Engineering Research and Development, Vol.2, Issue 2 (2012) 25-31.

Downloads

Published

2026-05-05