ANALYSIS AND DESIGN OF G+30 BUILDING USING ETABS IN ZONE IV AND ZONE V
Abstract
We know that earthquakes cause disasters from ancient times. Modern structures are becoming narrower and more prone to swaying, which negatively impacts them during earthquakes. In the past, engineers and researchers have sought to make the buildings as earthquake resistant as possible. Several practical reports have shown that incorporating lateral load resisting methods into building configurations significantly improves seismic performance (ETABS 9.7.4). The research has focused on specific cases involving shear walls and bracings at very high heights, with a maximum reward gain knowledge of of 93.5m. Story drift, shear force, building torsion,
bending moment, and time period are some of the seismic factors that may be modelled and examined in conjunction with certain heights to determine the impact of unusual situations. As outlined in IS 1893-2002, the acquired information has been applied to Zone IV of Soil Type II, which consists of medium soils. Seismicity, ETABS 9.7.4, narrative sway, tensile stress, bending moment, duration, and responses from supports.
References
A.Pavan Kumar Reddy, R.Master Praveen Kumar, “Analysis of G+30 Highrise Buildings by Using Etabs for Various Frame Sections In Zone IV and Zone V”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 7, July 2017.
Narla mohan , a.mounika vardhan, “analysis of g+20 rc building in different zones using etabs”, international journal of professional engineering studies, Volume VIII /Issue 3 / MAR 2017.
J.CHIRANJEEVI YADAV1 , L.RAMAPRASAD REDDY, “dynamic analysis of g + 20 residential building in zone2 and zone5 by using etabs”, international journal of professional engineering studies, Volume VIII /Issue 3 / APR 2017.
V.Rajesh1 , K Jaya Prakash2, “Wind And Seismic Analysis And Design Of Multistoried Building (G+30) By Using Staad Pro”, International Journal of Mechanical Engineering and Computer Applications, Vol. 4, No. 1, Jan- Feb.
Tatheer Zahra, Yasmeen Zehra, Noman Ahmed, “Comparison of RC Building for Low, Moderate and High Seismic Categories”, International Journal of Civil & Environmental Engineering IJCEE- IJENS Vol: 15 No: 02.
Dhara Shah, “comparison of seismic fragility curves for rc framed buildings in zone iii and v; for hard, medium and soft soil as per is1893 part-1: 2002 and hazus mh 2.0”, IJRET: International Journal of Research in Engineering and Technology, Volume: 07 Issue: 06 | June-2018,
Tatheer Zahra, Yasmeen Zehra, “Effect of Rising Seismic Risk on the Design of High Rise Buildings in Karachi” , International Journal of Civil & Environmental Engineering IJCEE-IJENS Vol:12 No:06.
A. A. Jadhav1 , Dr. S. K. Kulkarni2 , A. A. Galatage, “Comparison of the Effect of Earthquake and Wind Loads on the Performance of RC Framed Shear Wall Building with its Different Orientation”, Vol-2 Issue-6 2016 IJARIIE-ISSN(O)- 2395-4396.
SILUVERI SHIVAJI, A. SRAVAN, P. RAMA KRISHNA, “Analysis of Seismic Forces for A Multi-Storied (G+15) Residential Building by Using STAAD.Pro”, International Journal of Ethics in Engineering & Management Education Website: www.ijeee.in (ISSN: 2348-4748, Volume 4, Issue 2, February 2017).
