Additive Manufacturing of Porous Titanium Scaffolds for Enhanced Osseointegration
DOI:
https://doi.org/10.5281/zenodo.22502920Keywords:
additive manufacturing, porous titanium scaffolds, osseointegration, selective laser melting, stress shieldingAbstract
Background: Solid titanium implants are far stiffer than cortical bone, promoting stress shielding, while additive manufacturing (AM) now enables porous titanium scaffolds with tunable pore architecture. Objective: This narrative review synthesizes published evidence on selective laser melting and electron beam melting of porous Ti-6Al-4V scaffolds for enhanced osseointegration. Methods: Peer-reviewed studies and reviews addressing AM process characteristics, pore design, mechanical trade-offs, and preclinical/clinical osseointegration outcomes were synthesized. Findings: Compressive modulus and strength fall approximately exponentially with porosity, and pore sizes of roughly 300-700 micrometers with 50-80% porosity are widely reported as a practical compromise between bone ingrowth and mechanical competence; triply periodic minimal surface and graded lattice designs further improve stress distribution and fatigue resistance. Animal studies confirm superior bone ingrowth and bonding for engineered porous scaffolds over solid or roughened surfaces, and porous titanium is now used clinically in acetabular and maxillofacial reconstruction, though outcomes vary by application. Conclusions: AM porous titanium is a validated but still-maturing strategy for improving osseointegration, requiring continued co-optimization of architecture, manufacturing quality control, and clinical follow-up.
References
Koju N, Niraula S, Fotovvati B (2022) Additively Manufactured Porous Ti6Al4V for Bone Implants: A Review. Metals, 12(4):687, DOI 10.3390/met12040687.
Jang TS, Kim D, Han G, Yoon CB, Jung HD (2020) Powder based additive manufacturing for biomedical application of titanium and its alloys: a review. Biomedical Engineering Letters, 10:505-516, DOI 10.1007/s13534-020-00177-2.
Niinomi M, Liu Y, Nakai M, Liu H, Li H (2016) Biomedical titanium alloys with Young's moduli close to that of cortical bone. Regenerative Biomaterials, 3(3):173-185, DOI 10.1093/rb/rbw016.
Sing SL, An J, Yeong WY, Wiria FE (2016) Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs. Journal of Orthopaedic Research, 34(3):369-385, DOI 10.1002/jor.23075.
Ferraris S, Spriano S (2021) Porous Titanium by Additive Manufacturing: A Focus on Surfaces for Bone Integration. Metals, 11(9):1343, DOI 10.3390/met11091343.
Distefano F, Pasta S, Epasto G (2023) Titanium Lattice Structures Produced via Additive Manufacturing for a Bone Scaffold: A Review. Journal of Functional Biomaterials, 14(3):125, DOI 10.3390/jfb14030125.
Lv J, Jin W, Liu W, Qin X, Feng Y, Bai J, Wu Z, Li J (2022) Selective Laser Melting Fabrication of Porous Ti6Al4V Scaffolds With Triply Periodic Minimal Surface Architectures: Structural Features, Cytocompatibility, and Osteogenesis. Frontiers in Bioengineering and Biotechnology, 10:899531, DOI 10.3389/fbioe.2022.899531.
Qin Y, Wang Q, Shi C, Liu B, Ma S, Zhang M (2022) Structural design and performance study of primitive triply periodic minimal surfaces Ti6Al4V biomimetic scaffold. Scientific Reports, 12:12759, DOI 10.1038/s41598-022-17066-6.
Alkentar R, Kladovasilakis N, Tzetzis D, Mankovits T (2023) Effects of Pore Size Parameters of Titanium Additively Manufactured Lattice Structures on the Osseointegration Process in Orthopedic Applications: A Comprehensive Review. Crystals, 13(1):113, DOI 10.3390/cryst13010113.
Sing SL (2019) Concepts of Selective Laser Melting for Orthopaedic Implants. In: Selective Laser Melting of Novel Titanium-Tantalum Alloy as Orthopaedic Biomaterial (Springer Theses). Springer, Singapore, pp. 9-36, DOI 10.1007/978-981-13-2724-7_2.
Gatto ML, Groppo R, Bloise N, Fassina L, Visai L, Galati M, Iuliano L, Mengucci P (2021) Topological, Mechanical and Biological Properties of Ti6Al4V Scaffolds for Bone Tissue Regeneration Fabricated with Reused Powders via Electron Beam Melting. Materials, 14(1):224, DOI 10.3390/ma14010224.
Yan R, Luo D, Huang H, Li R, Yu N, Liu C, Hu M, Rong Q (2018) Electron beam melting in the fabrication of three-dimensional mesh titanium mandibular prosthesis scaffold. Scientific Reports, 8:750, DOI 10.1038/s41598-017-15564-6.
Li T, Xu M, Yao J, Deng L, Wang B (2025) Preparation and Post-Processing of Three-Dimensional Printed Porous Titanium Alloys. Materials, 18(8):1864, DOI 10.3390/ma18081864.
He S, Zhu J, Jing Y, Long S, Tang L, Cheng L, Shi Z (2024) Effect of 3D-Printed Porous Titanium Alloy Pore Structure on Bone Regeneration: A Review. Coatings, 14(3):253, DOI 10.3390/coatings14030253.
Cheong VS, Fromme P, Coathup MJ, Mumith A, Blunn GW (2020) Partial Bone Formation in Additive Manufactured Porous Implants Reduces Predicted Stress and Danger of Fatigue Failure. Annals of Biomedical Engineering, 48(1):502-514, DOI 10.1007/s10439-019-02369-z.
Ilea A, Vrabie OG, Băbțan AM, Miclăuş V, Ruxanda F, Sárközi M, Barbu-Tudoran L, Mager V, Berce C, Boșca BA, Petrescu NB, Cadar O, Câmpian RS, Barabás R (2019) Osseointegration of titanium scaffolds manufactured by selective laser melting in rabbit femur defect model. Journal of Materials Science: Materials in Medicine, 30:26, DOI 10.1007/s10856-019-6227-9.
Taniguchi N, Fujibayashi S, Takemoto M, Sasaki K, Otsuki B, Nakamura T, Matsushita T, Kokubo T, Matsuda S (2016) Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment. Materials Science and Engineering: C, 59:690-701, DOI 10.1016/j.msec.2015.10.069.
Peng W, Xu L, You J, Fang L, Zhang Q (2016) Selective laser melting of titanium alloy enables osseointegration of porous multi-rooted implants in a rabbit model. BioMedical Engineering OnLine, 15:85, DOI 10.1186/s12938-016-0207-9.
Wang X, Mu M, Yan J, Han B, Ye R, Guo G (2024) 3D printing materials and 3D printed surgical devices in oral and maxillofacial surgery: design, workflow and effectiveness. Regenerative Biomaterials, 11:rbae066, DOI 10.1093/rb/rbae066.
McCloskey CP, Sunkara A, Kalala S, Peterson JT, Sohn MO, Chen AR, Movva AK, Anastasio AT (2026) Patient-Specific 3D-Printed Porous Metal Implants in Orthopedics: A Narrative Review of Current Applications and Future Prospects. Applied Sciences, 16(7):3192, DOI 10.3390/app16073192.
Onică N, Budală DG, Baciu ER, Onică CA, Gelețu GL, Murariu A, Balan M, Pertea M, Stelea C (2024) Long-Term Clinical Outcomes of 3D-Printed Subperiosteal Titanium Implants: A 6-Year Follow-Up. Journal of Personalized Medicine, 14(5):541, DOI 10.3390/jpm14050541.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Karl Kask, et al.

This work is licensed under a Creative Commons Attribution 4.0 International License.